Loading

In the News

blank space
Spring Load Limit Restriction Update (notices 2-5)
blank space

Department of Transportation

For immediate release: February 15, 2017

For more information: Dan Varilek, 773-3571 daniel.varilek@state.sd.us

 

PIERRE, S.D. – Spring Load Limit Restrictions will apply to the road segment and at the indicated weight limit shown in the table below. 

2017 STATE HIGHWAY SPRING LOAD LIMIT RESTRICTIONS

Effective Feb. 15, 2017 8 a.m.


Highway

Location

Begin/End MRM

Length

Posting

Region

SD 26

From Hwy 47 to Hwy 45

230.12 to 252.85

22.73

6 Tons/Axle

Aberdeen

Effective Feb. 15, 2017 1 p.m.


Highway

Location

Begin/End MRM

Length

Posting

Region

SD 1806S

Jct SD273 north to US83

138.45 to 180.05

41.6

7 Tons/Axle

Pierre

SD 1806N

Intersection west of the dam to Mission Ridge

191.61 to 221.05

29.4

7 Tons/Axle

Pierre

SD 1804N

Hughes/Sully County line to US212

266.35 to 303.3

37.0

7 Tons/Axle

Pierre

Effective Feb. 15, 2 p.m.


Highway

Location

Begin/End MRM

Length

Posting

Region

SD 20

Fm Jct. US 85 South to Jct. SD 79 South

29.31 to 51.74

22.4

8 Tons/Axle

Rapid City

SD 73

Fm Jct. SD 20 West to Jct. US 12 West of Lemmon

213.45 to 241.63

28.2

6 Tons/Axle

Rapid City

SD73

Fm Jct. SD 34 at Howes Corner to Jct. US 212 at Faith

146.14 to 174.39

28.3

7 Tons/Axle

Rapid City

Effective Feb. 16, 8 a.m.


Highway

Location

Begin/End MRM

Length

Posting

Region

SD 25

Fm Jct. SD 38 to Jct. SD 34

61.72 to 82.83

21.1

6 Tons/Axle

Mitchell

SD 42

Fm US 281 East to the Davison County Line

280.00 to 285.88

5.9

6 Tons/Axle

Mitchell

SD 45

Fm Platte north to I-90

27.00 to 51.59

24.5

8 Tons/Axle

Mitchell

SD 1804

Fm SD 44 south 8 miles

112.13 to 120.16

8.0

6 Tons/Axle

Mitchell

SD 1806

US 18 north to the Missouri River

15.68 to 25.75

10.0

6 Tons/Axle

Mitchell

SD 1806

SD 44 south 6 miles

42.78 to 48.55

5.9

6 Tons/Axle

Mitchell

SD 251

Nebraska State Line to US 18

0.00 to 15.84

15.8

6 Tons/Axle

Mitchell

Effective Feb. 17, 8 a.m.


Highway

Location

Begin/End MRM

Length

Posting

Region

US 16A

US 385 at Custer to SD 244

26.14 to 55.76

29.6

7 Tons/Axle

Rapid City

SD 36

US 16A to SD 79

36.00 to 45.01

9.0

7 Tons/Axle

Rapid City

SD 40

Hayward to Cheyenne River

38.26 to 69.00

30.7

7 Tons/Axle

Rapid City

SD 87

Wind Cave Nat’l Park to US 16/385

47.27 to 79.36

30.8

7 Tons/Axle

Rapid City

SD 71

Neb Line to 2 mi. S of Cheyenne River

0.00 to 21.00

21.0

7 Tons/Axle

Rapid City

SD 89

US 16A to SD 87

58.51 to 64.58

6.0

7 Tons/Axle

Rapid City

SD 471

Provo to US 18

19.60 to 24.00

4.4

7 Tons/Axle

Rapid City

 

 

 

The effective date of the load restrictions is determined by weather and road conditions.

A spring load restriction report is usually issued in advance of any major load restriction change.  This report is issued for guidance only and does not take precedence over load restriction signs in place. For further information or a copy of a Spring Load Restriction Map, please contact the DOT at 605-773-3571. Spring Load Limit Information may also be found on the Internet at:

http://www.sddot.com/travelers/loadlimits/Default.aspx

Individuals can subscribe to an email list to receive Spring Load Limit Restriction information electronically. To subscribe go to:

            https://listserv.sd.gov/scripts/wa.exe?A0=DOTSPRINGLOADLIMITS

Click subscribe located on the right side of the screen and follow the instructions. A valid email address is required. If you would like to unsubscribe at any time from the list, visit the same site, click Unsubscribe and enter the information and email you subscribed with.

 

blank space